A SERVICE OF

logo

Open as PDF
next previous
Removing the paper cutter
To remove the paper cutter, follow the steps below. After you
remove the paper cutter, store it in its original box and packing
materials.
1. Cut off any printed document in the printer as described in
the previous section.
2. Turn off the printer.
3. Open the rear flap and remove it by lifting up to pull the
pegs on the flap out of the notches at the back of the printer.
Then unplug the paper cutter’s connector from the printer.
5-28
5-22-An
L
Peony Rev.C
A5 size Chapter 6
98/01/07 Pass 4
6-32 Using Printer Options