By comparing the characters printed in the right column
with the printout of the hexadecimal codes, you can check
the codes being received by the printer. If characters are
printable, they appear in the right column as ASCII
characters. Nonprintable codes, such as control codes,
are represented by dots.
4. To turn off hex dump mode, press the Pause button, and
then turn off the printer.
Problems and Solutions
This section divides printer problems into four categories:
Power supply . . . . page 8-8
Paper handling . . . page 8-9
Operation . . . . . . . page 8-13
Printout . . . . . . . . page 8-15
Options . . . . . . . . page 8-18
See the section for the type of problem you have and look for
the description of your problem. The most likely causes and
solutions are listed first, so try them in the order that they are
listed until the problem is solved.
8
Troubleshooting
R
Peony Rev.C
A5 size Chapter 8
98/01/07 DR, pass 4
Troubleshooting 8-7
