A SERVICE OF

logo

Labels
R Labels should be securely attached to the backing sheet and the
label surface should be flat.
R Labels should not peel off their backing sheet under the
conditions below.
R When using labels whose backing sheet is entirely covered, make
sure the cuts around the edges of the labels are perforated.
R When using labels whose backing sheet is not covered with the
label material, see the illustration below.
Backing sheet
Width 101 to 406 mm (4 to 16 inches)
Length 88.9 mm (3.5 inches) minimum
label
27 mm
wrapping drum radius 27 mm
wrapping angle 180°
wrapping time 24 hours
ambient temperature 40°C
ambient humidity 30%
label
several uncut areas
on each side
label sheet
backing sheet
Me-086
corner radius is
2 to 3 mm
label
backing sheet
label
Me-087
A
R
Peony Rev.C
A5 size Appendix A
98/01/07 pass 4
Specifications A-7