A SERVICE OF

logo

840 Multicast Commands
Syntax
ip pimsm ssm {default |
group-address group-mask
}
no ip pimsm ssm
default
— Defines the SSM range access list to 232/8.
group-address group-mask
— defines the SSM range.
Default Configuration
There is no SSM range defined by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip pimsm ssm default
console(config)#ip pimsm ssm 224.1.0.0 255.255.0.0
show bridge multicast address-table count
Use the show bridge multicast address-table count command to view
statistical information about the entries in the multicast address table.
Syntax
show bridge multicast address-table count
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode