Dynamic ARP Inspection Commands 287
show ip arp inspection vlan
Use the show ip arp inspection vlan command to display the Dynamic ARP
Inspection configuration on all the VLANs in the given VLAN range. It also
displays the global configuration values for source MAC validation,
destination MAC validation and invalid IP validation.
Syntax
show ip arp inspection vlan [
vlan-range
]
vlan-range
— A valid VLAN range.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
The following global parameters are displayed:
The following fields are displayed for each VLAN:
Source Mac Validation If Source Mac validation of ARP frame is enabled.
Destination Mac
Validat ion
If Destination Mac validation of ARP Response frame is
enabled.
IP Address Validation If IP address validation of ARP frame is enabled.
Vlan The Vlan-Id for each displayed row.
Configuration Whether DAI is enabled on the Vlan.
Log Invalid Whether logging of invalid ARP packets is enabled on the Vlan.
ACL Name ARP ACL Name if configured on the Vlan
Static flag If the ARP ACL is configured static on the Vlan
