1102 Configuration and Image File Commands
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The location of a file system dictates the format of the source or destination
URL.
startup-config Represents the startup configuration file.
startup-log Represents the startup syslog file. This can only be the source of a
copy operation.
operational-log Represents the operational syslog file. This can only be the source
of a copy operation.
script
scriptname
Represents a CLI script file.
image Represents the software image file. When "image" is the target of a
copy command, it refers to the backup image. When "image" is
the source of a copy command, it refers to the active image. If this
is destination, the file will be distributed to all units in the stack.
ftp: Source or destination URL for an FTP network server. The syntax
for this alias is ftp:
//ipaddr/filepath/filename image
.
tftp: Source or destination URL for a TFTP network server. The syntax
for this alias is tftp:
[[//location]/directory]/filename
. An out-of-
band IP address can be specifed as described in the User
Guidelines.
xmodem: Source for the file from a serial connection that uses the Xmodem
protocol.
backup-config Represents the backup configuration file.
unit Indicates which unit in the stack is the target of the copy
command.
Reserved
Keyword
Description
