A SERVICE OF

logo

Open as PDF
next previous
490 QoS Commands
The following table lists the parameters in the example and gives a
description of each.
show classofservice ip-dscp-mapping
Use the show classofservice ip-dscp-mapping command in Privileged EXEC
mode to display the current IP DSCP mapping to internal traffic classes for a
specific interface.
Syntax
show classofservice ip-dscp-mapping
• Command is supported only globally.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Example
console#show classofservice ip-dscp-mapping
IP DSCP Traffic Class
------------- -------------
0(be/cs0 1
11
Parameter Description
User Priority The 802.1p user priority value.
Traffic Class The traffic class internal queue identifier to which
the user priority value is mapped.