A SERVICE OF

logo

Open as PDF
next previous
Configuring Switch Information 349
Viewing the MSTP Interface Table
1
Open the
MSTP Interface Settings
page.
2
Click
Show All
.
The
MSTP Interface Table
page opens.
Figure 7-45. MSTP Interface Table
Defining MSTP Interfaces Using CLI Commands
The following table summarizes the equivalent CLI commands for defining MSTP interfaces as
displayed in the Spanning Tree MSTP Interface Settings page.
Table 7-24. MSTP Interface CLI Commands
CLI Command Description
spanning-tree mst instance-id cost cost Sets the path cost of the port for MST calculations
spanning-tree mst instance-id priority
priority
Sets the device priority for the specified ST instance.
show spanning-tree mst-configuration Displays the MST configuration.