Configuring Switch Information 305
•
LAG Type
— The port types that comprise the LAG.
•
Admin Status
— Enables or disables the selected LAG.
–
Up
— Traffic is enabled through the LAG.
–
Down
— Traffic is disabled through the LAG.
•
Current Status
— Indicates if the LAG is currently operating.
•
Admin Speed
— The configured speed at which the LAG is operating. The possible field values are:
–
10M
— Indicates the LAG is currently operating at 10 Mbps.
–
100M
— Indicates the LAG is currently operating at 100 Mbps.
–
1000M
— Indicates the LAG is currently operating at 1000 Mbps.
•
Current Speed
— The speed at which the LAG is currently operating.
•
Admin Auto Negotiation
— Auto Negotiation is a protocol between two link partners that enables a
LAG to advertise its transmission rate, duplex mode and flow control abilities to its partner.
–
Enable
— Enables Auto Negotiation on the LAG.
–
Disable
— Disables Auto Negotiation on the LAG.
•
Current Auto Negotiation
— The current Auto Negotiation setting.
•
Admin Advertisement
— Defines the auto-negotiation setting the LAG advertises. The possible field
values are:
–
Max Capability
— Indicates that all LAG speeds and Duplex mode settings are accepted.
–
10 Full
— Indicates that the LAG advertises for a 10 mbps speed LAG and full duplex mode
setting.
–
100 Full
— Indicates that the LAG advertises for a 100 mbps speed LAG and full duplex mode
setting.
–
1000 Full
— Indicates that the LAG advertises for a 1000 mbps speed LAG and full duplex mode
setting.
•
Current Advertisement
— The LAG advertises its speed to its neighbor LAG to start the negotiation
process. The possible field values are those specified in the
Admin Advertisement
field.
•
Neighbor Advertisement
— Indicates the neighboring LAG advertisement settings. The field values
are identical to the
Admin Advertisement
field values.
•
Admin Flow Control
— Indicates the flow control status on the LAG. Flow Control mode is effective
on the ports operating in Full Duplex in the LAG.
–
Enable
— Enables flow control on the LAG.
–
Disable
— Disables flow control on the LAG.
–
Auto-negotiation
— Enables the auto negotiation of flow control on the LAG.
