248 Configuring System Information
The File Download from Server page contains the following fields:
•
Supported IP Format
— Specifies the IP format supported by the server. The possible values are:
–
IPv6
— IP version 6 is supported.
–
IPv4
— IP version 4 is supported.
•
IPv6 Address Type
— When the server supports IPv6 (see previous parameter), this specifies the type
of static address supported. The possible values are:
–
Link Local
— A Link Local address that is non-routable and used for communication on the same
network only.
–
Global
— A globally unique IPv6 address; visible and reachable from different subnets.
•
Link Local Interface
— When the server supports an IPv6 Link Local address (see previous
parameter), this specifies the the Link Local interface. The possible values are:
–
VLAN1
— The IPv6 interface is configured on VLAN1.
–
ISATAP
— The IPv6 interface is configured on ISATAP tunnel.
•
Firmware Download
— The Firmware file is downloaded. If
Firmware Download
is selected,
the
Configuration Download
fields are grayed out.
•
Configuration Download
— The Configuration file is downloaded. If
Configuration Download
is
selected, the
Firmware Download
fields are grayed out.
•
Download via TFTP
—
Enables initiating an image upload via the TFTP server.
•
Download via HTTP
—
Enables initiating an image upload via the HTTP server.
Firmware Download
•
Server IP Address
— The Server IP Address from which the firmware files are downloaded.
•
Source File Name (1-64 characters)
— Indicates the file to be downloaded.
•
Destination File Name
— The destination file type to which the file is downloaded. The possible field
values are:
–
Software Image
— Downloads the Image file. The image file overwrites the non-active image. It is
recommended to designate that the non-active image becomes the active image after reset, and
then to reset the device following the download. During the Image file download a dialog box
opens which displays the download progress. The window closes automatically when the download
is complete.
–
Boot Code
— Downloads the Boot file.
