A SERVICE OF

logo

326 Configuring Switch Information
Figure 7-35. Spanning Tree Global Settings
The Spanning Tree Global Settings page contains the following fields:
Spanning Tree State
— Enables or disables Spanning Tree on the device. The possible field values are:
Enable
— Enables Spanning Tree.
Disable
— Disables Spanning Tree.
STP Operation Mode
— Indicates the STP mode by which STP is enabled on the device. The possible
field values are:
Classic STP
— Enables Classic STP on the device. This is the default value.
Rapid STP
— Enables Rapid STP on the device.
Multiple STP
— Enables Multiple STP on the device.