Configuring System Information 255
Copying Files
Files can be copied and deleted from the Copy Files page.
To open the Copy Files page, click System → File Management → Copy Files in the tree view.
Figure 6-109. Copy Files
The Copy Files page contains the following fields:
•
Copy Master Firmware
— Indicates the firmware file to copy. The possible field values are:
–
Source
— Copies the current Stacking Master’s Software Image file or Boot Code file.
–
Destination Unit
— Specifies the stacking member to upload the file.
•
Copy Configuration
— When selected, copies either the running, startup or backup configuration file
of the Master file to the destination file.
–
Source
— Indicates the type of file to be copied to the destination file. Select either the Running
Configuration or Startup Configuration.
–
Destination
— Indicates the destination configuration file to which the source file is copied.
Select My First Backup or Startup Configuration.
–
New File Name (1-64 characters)
— Indicates the name of the newly created backup
configuration file.
•
Restore Configuration Factory Defaults
— When selected, indicates that the current configuration
settings should be replaced by the factory configuration default settings. When clear, indicates that the
current configuration settings should be maintained.
