2-59
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
show interfaces ssl-proxy
show interfaces ssl-proxy
To display information about the configured subinterfaces, use the show interfaces ssl-proxy command.
show interfaces ssl-proxy 0.subinterface
Syntax Description
Defaults This command has no default settings.
Command Modes EXEC
Command History
Examples This example shows how to display information about the configured subinterfaces:
ssl-proxy# show ionterfaces 0.3
SSL-Proxy0.3 is up, line protocol is up
Hardware is STE interface, address is 0001.6445.c744 (bia 00e0.14c1.30e9)
Internet address is 10.10.0.16/8
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation 802.1Q Virtual LAN, Vlan ID 3.
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters never
ssl-proxy#
Related Commands policy tcp
subinterface-number Subinterface ID; valid values are from 0 to 4294967295.
Release Modification
SSL Services Module
Release 3.1(1)
Support for this command was introduced on the Catalyst 6500 series
SSL Services Module.
