2-86
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter2 Commands for the Catalyst 6500 Series SSL Services Module
snmp-server enable
snmp-server enable
To configure the SNMP traps and informs, use the snmp-server enable command. Use the no form of
this command to disable SNMP traps and informs.
snmp-server enable {informs | traps {ipsec | isakmp | snmp | {ssl-proxy [cert-expiring]
[oper-status]}}}
no snmp-server enable {informs | traps {ipsec | isakmp | snmp | {ssl-proxy [cert-expiring]
[oper-status]}}}
Syntax Description
Defaults This command has no default setting.
Command Modes Global configuration
Command History
Examples This example shows how to enable SNMP informs:
ssl-proxy (config)# snmp-server enable informs
ssl-proxy (config)#
This example shows how to enable SSL-proxy traps:
ssl-proxy (config)# snmp-server enable traps ssl-proxy
ssl-proxy (config)#
This example shows how to enable SSL-proxy notification traps:
ssl-proxy (config)# snmp-server enable traps ssl-proxy cert-expiring oper-status
ssl-proxy (config)#
informs Enables SNMP informs.
traps Enables SNMP traps.
ipsec Enables IPsec traps.
isakmp Enables ISAKMP traps.
snmp Enables SNMP traps.
ssl-proxy Enables SNMP SSL proxy notification traps.
cert-expiring (Optional) Enables SSL proxy certificate-expiring notification traps.
oper-status (Optional) Enables SSL proxy operation-status notification traps.
Release Modification
SSL Services Module
Release 2.1(1)
Support for this command was introduced on the Catalyst 6500 series
SSL Services Module.
