2-51
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
pool ca
pool ca
To enter the certificate authority pool configuration submode, use the pool ca command. In the
certificate authority pool configuration submode, you can configure a certificate authority pool, which
lists the CAs that the module can trust.
pool ca ca-pool-name
Syntax Description
Defaults This command has no arguments or keywords.
Command Modes Context subcommand mode
Command History
Usage Guidelines Enter each certificate-authority pool configuration submode command on its own line.
Table 2-7 lists the commands that are available in certificate-authority pool configuration submode.
Examples This example shows how to add a certificate-authority trustpoint to a pool:
ssl-proxy(config)# ssl-proxy context s1
ssl-proxy(config-context)# pool ca test1
ssl-proxy(config-ctx-ca-pool)# ca trustpoint test20
ssl-proxy(config-ctx-ca-pool)#
ca-pool-name Certificate authority pool name.
Release Modification
SSL Services Module
Release 2.1(1)
Support for this command was introduced on the Catalyst 6500 series
switches.
SSL Services Module
Release 3.1(1)
The pool ca command (entered in context subcommand mode) replaces
the ssl-proxy pool ca command (entered in global subcommand mode).
Table 2-7 Proxy-policy TCP Configuration Submode Command Descriptions
Syntax Description
ca Configures a certificate authority. The available subcommand is as follows:
trustpoint ca-trustpoint-name—Configures a certificate-authority trustpoint.
Use the no form of this command to return to the default setting.
default Sets a command to its default settings.
exit Exits from proxy-service configuration submode.
help Allows you to configure the connection-establishment timeout; valid values are
from 5 to 75 seconds. Use the no form of this command to return to the default
setting.
