Rack-Mounting the Webcache 27
If the Webcache is installed in a 19-inch rack or closed assembly its local
air temperature may be greater than room ambient temperature.
■ The air is as free from dust as possible.
■ The Webcache is installed in a clean, air conditioned environment.
Rack-Mounting the
Webcache
The Webcache is 1U high and will fit in most standard 19-inch rack
mounts.
CAUTION: The rear of the Webcache must be supported. This is best
achieved through the use of a 19-inch 4-posted rack.
CAUTION: Disconnect all cables from the Webcache before continuing.
To rack-mount your Webcache:
1 Place the Webcache the right way up on a hard flat surface, with the
front facing towards you.
2 Locate the Rack-Mounting Kit that is supplied with the Webcache. The
Kit contains the items shown in Figure 4.
Figure 4 The Rack-Mounting Kit Contents
You must use the rails and screws supplied with the Rack-Mounting Kit.
Damage caused to the Webcache by using incorrect rails and screws
invalidates your warranty.
16 x
2x
2x
2x
Screws
Front
Plates
Rack-Mounting
Brackets
Rack-Mounting
Rails
2x
Adjustable
Brackets
