Saving a Configuration 105
earlier software version via a software installation, you can use a
matching configuration file to restore the settings.
Saving a
Configuration
To save the current system configuration of the Webcache using the Web
interface:
1 Log in to the Web interface.
2 Click Device View on the Toolbar.
3 Select System -> Control -> Save Configuration in the Navigation
Tree. The Save Configuration screen is displayed.
4 Click Save.
5 Your Web browser prompts you to enter a filename and to choose a
location. When you have entered the required information, click OK. The
save process begins and the Save Configuration screen is closed. The save
process may take a few seconds to complete.
6 Write down the filename and location of the system configuration file for
future reference. You should repeat this for every configuration that you
save.
7 The Save Configuration screen in the Web interface does not close
automatically when the save process has been completed. Click Cancel to
close the screen when the configuration has been saved.
You can exit the Save Configuration screen without saving a system
configuration file by clicking Cancel instead of Save.
Restoring a
Configuration
To restore a saved system configuration file to the Webcache using the
Web interface:
1 Log in to the Web interface.
2 Click Device View on the Toolbar.
3 Select System -> Control -> Restore Configuration in the Navigation
Tree. The Restore Configuration screen is displayed.
4 In the Configuration Filename field, enter the network path and filename
of the saved system configuration file that you want to restore.
You can click Browse to search for the location of a file.
