Understanding the Command Line Interface 113
■ System menu
This menu contains commands that allow you to view and configure
information about the Webcache.
Entering Commands The command area of the Command Line Interface contains a Select
menu option prompt that allows you to enter the commands in the menu
area.
Commands are not case-sensitive.
■ To enter a simple command:
At the prompt, enter the name of the command.
■ To enter multiple commands:
At the prompt, enter each command in succession. For example, to
enter the Protocol menu and change the Webcache IP configuration,
enter:
protocol ip basicConfig
from the Top-level menu.
■ To enter commands that require values:
Append the values to the name of the command. For example, to
display the system menu and change your password, enter:
system password <password>
If you do not specify values for a command that requires them, you
are prompted to enter the values. At each prompt, the default value is
displayed in brackets.
■ To enter abbreviated commands:
At the prompt, enter enough characters to uniquely identify the
commands. For example, to enter the security menu and change the
password for the admin user, enter:
se pa <password>
from the Top-level menu.
■ To abort a command
Press [Esc] to return to the Top-level menu.
Displaying Menus There are several ways to display the menus in the Command Line
Interface menu structure:
