Exiting the Command Line Interface 117
The following prompt is displayed:
Retype password:
16 Re-enter the new password. A message is displayed informing you that
the password has been successfully changed.
The following prompt is displayed:
Please enter mode of operation (proxy, transparent) [proxy]:
17 Enter either proxy or transparent.
For further information, see “Deploying the Webcache in Your Network”
on page 33.
If you entered
proxy, the following prompt is displayed:
Enter caching port number
18 Enter the port number on which the Webcache will listen for traffic.
The Finish prompt is displayed, which summarises the selections that you
have made.
Exiting the
Command Line
Interface
You can exit the Command Line Interface at any time using the logout
command on the Top-level menu.
To exit the Command Line Interface, at the Top-level menu, enter:
logout
If a period of inactivity lasts longer than 30 minutes, the Webcache will
automatically log you out.
After the exit, the first key that you press returns you to the login
sequence.
Displaying and
Changing IP-related
Information
You can display and change the IP-related information for the Webcache
using the commands on the IP menu. These commands allow you to:
■ Specify basic IP management configuration
■ Configure the Domain Name System settings
■ Reset IP information to factory default settings
■ Send out a PING request
■ Display IP summary information
