Filter
Top Products
13
AR0360
8
4.8 Place the log retainer in the two guides as shown in
Diagram 9.
AR2076
9
FOR CLARITY, THE FOLLOWING LOG ARRANGEMENT
DIAGRAMS DO NOT INCLUDE ILLUSTRATION OF THE
RETAINER.
4.9 Locate the front coal between the heat shield and the flame
baffle so that the ends sit flat against the burner skin (see
Diagram 10).
AR0361
10
4.10 Place five of the loose round coals on the front coal so that
they lean against the flame baffle, in between the fingers.
Place the two rectangular coals against the reflector panels,
one either side, behind the front row of loose coals (see
Diagram 11).
INSTALLATION INSTRUCTIONS
INSTALLATION
AR0362
11
4.11 Place four of the loose round coals behind the first row so
that they sit on the fingers, the two outer coals should touch
the rectangular coals (see Diagram 12).
AR0363
12
4.12 Place the remaining three coals behind the centre row so
that they touch the back panel (see Diagram 13).
AR0364
13
4.13 Replace the glass frame using the 6 x frame fixing
screws (see Diagram 6) and close door.
5. LIGHTING THE STOVE
5.1 For full instructions see User Instructions, Section 2.