Filter
Top Products
Maintenance Reminder Message
A reminder will display in the scrolling message area when it is time for accessory
maintenance if selected in the Thermostat Options Confi guration Menu. When a
reminder appears, it can be cleared by touching the Clean Display key. This will
also reset the timer to begin a new time period for the reminder.
Air Filter Maintenance - When the
system has run for the selected length
of time, the scrolling message area will
show “CHANGE FILTER”
Humidifi er Pad Maintenance - Based
on the reminder setting, the scrolling
message area will show “CHANGE
HUMIDIFIER PAD” to indicate
maintenance is required.
UV Lamps Maintenance - Based on the
reminder setting, the scrolling message
area will show “CHANGE UV LAMP” to
indicate maintenance is required.
Using the Thermostat
1
Advanced Installer Confi guration Menu
The Advanced Installer Confi guration menu provides access to equipment fault
status and equipment operating information and options.
Entering and Navigating the Advanced Installer
Confi guration Menu/Service Information
On the Home Screen Display, touch the Menu key to display additional key
choices.
Touch and hold the Installer Confi g
key to approximately 3 seconds to enter
the Thermostat Options Confi guration
Menu.
Touch and hold the Installer Confi g
key again for approximately 3 seconds
to enter the Advanced Installer
Confi guration Menu.
The display will change to the Fault
Screen indicating the equipment
connected. ADVANCED will appear on
the right of the display to indicate the
Advanced Installer Confi guration Menu.
The equipment connected will show
above the
or keys. The scrolling
message area will show “NO FAULTS”
or will show a description of the fault
with an error code in the temperature
display area. Touch or keys to
view the fault status of each piece of
equipment connected.
To change the display to the Equipment
User Menu, touch or .
Fault Status