Filter
Top Products
43
1. Press
SYSTEM
HEAT-OFF-COOL-AUTO
until COOL is displayed.
2. Follow the procedure for entering your heating
program, using your selected cooling times and
temperatures.
CHECK YOUR PROGRAMMING
Follow these steps to check your thermostat pro-
gramming one final time before beginning thermo-
stat operation.
1. Press
SYSTEM
HEAT-OFF-COOL-AUTO
until HEAT is displayed.
2. Press and hold
VIEW
PRGM
to view the heating period
times and temperatures in sequence for week-
day, then weekend MOR, DAY, EVE, and NHT
program periods.
3. Press
RUN
PRGM
.
4. Press
SYSTEM
HEAT-OFF-COOL-AUTO
until COOL is displayed.
5. Repeat step 2 to check cooling temperatures.
6. Press
RUN
PRGM
to begin program operation.
YOUR THERMOSTAT IS NOW COMPLETELY
PROGRAMMED AND READY TO AUTOMATI-
CALLY PROVIDE MAXIMUM COMFORT AND EF-
FICIENCY!
Press
SYSTEM
HEAT-OFF-COOL-AUTO
until OFF is displayed. Reattach
thermostat to subbase. Then press
SYSTEM
HEAT-OFF-COOL-AUTO
to
select the operation mode you want (HEAT, COOL,
AUTO). Press
FAN
ON – AUTO
until FAN is displayed
(automatic cycling).