Filter
Top Products
42
9. After entering your weekday heating program,
repeat steps 1 through 8 for your weekend pro-
gramming (keep in mind that for weekend pro-
gramming, the display should be changed from 5
DAY to 2 DAY).
10.When you have completed entering your heating
program, press
RUN
PRGM
.
Enter Cooling Program
If outside temperature is below 50
°F, we
recommend that you remove the thermostat
from the wall before proceeding with the
following steps to program cooling tem-
peratures. Personal injury or property dam-
age may occur due to air conditioner com-
pressor slugging. A fresh 9 volt Energizer
®
alkaline battery must be installed to perform
off-wall programming. Programming away
from the wall should prevent accidental com-
pressor operation. BE SURE TO USE
SYSTEM
HEAT-OFF-COOL-AUTO
TO TURN THERMOSTAT OFF BE-
FORE REATTACHING TO SUBBASE!
CAUTION
!