Filter
Top Products
36
8a.What time does the last person go to bed at
night?
b. What temperature should the house be at this
time? These will be your NHT (night) tempera-
ture settings.
Now look at the factory preprogrammed times and
temperatures shown below. If this program will suit
your needs, simply press
RUN
PRGM
to begin running the
factory preset program.
If you want to change the preprogrammed times and
temperatures, do the following.
To operate properly in the AUTO mode, there must
be a minimum 1°F separation between the highest
heat temperature and the lowest cool temperature
(see diagram below).
Determine the time periods and heating and cooling
temperatures for your weekday program. You must
program 4 periods for each day (MOR, DAY, EVE,
and NHT). However, you may use the same heating
Heating Program for ALL days of the Week:
Cooling Program for ALL Days of the Week:
PERIOD TIME TEMP PERIOD TIME
TEMP
MOR
DAY
EVE
NHT
5:00 AM
9:00 AM
4:00 PM
10:00 PM
70
70
70
64
MOR
DAY
EVE
NHT
5:00 AM
9:00 AM
4:00 PM
10:00 PM
78
82
78
78
NOTE
79
78
77
76
75
74
73
COOLING TEMPERATURES
HEATING TEMPERATURES
DEAD BAND 1°F