Filter
Top Products
19
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Tools Needed:
INSTALLATION
19
Slide the nylon center bushing into the
stationary spring cone at the end of the spring
and align the stationary spring cone(s) with
the holes in the center bearing bracket.
Secure the spring(s) to the center bearing
bracket with (2) 3/8”- 16 x 1-1/2” hex head
bolts and (2) 3/8”- 16 hex nuts.
IMPORTANT: SPRINGS UNDER TENSION
CAN BE DANGEROUS.
IMPORTANT: THE SPRING WARNING
TAG(S) SUPPLIED MUST BE SECURELY
ATTACHED TO THE STATIONARY SPRING
CONE IN PLAIN VIEW. SHOULD A
REPLACEMENT SPRING WARNING TAG BE
REQUIRED, CONTACT WAYNE-DALTON
CORP. FOR FREE REPLACEMENTS.
Nylon Center Bushing
TORSION
SPRING
(2) 3/8”- 16 HEX NUTS
CENTER BEARING
BRACKET
9/16” Socket
Ratchet Wrench
9/16” Wrench
Step Ladder
(2) 3/8”- 16 X 1-1/2”
HEX HEAD BOLTS
TORSION
SPRING
TORSION
SPRING
NYLON CENTER
BUSHING
CENTER BEARING
BRACKET
STATIONARY
SPRING CONE
STATIONARY
SPRING CONE