Filter
Top Products
6.1.3 ECB Drive or Bypass Selection
Use the keypad and display to switch between the motor running in drive mode or bypass when operating in local control.
The display in operating mode is shown below.
1. Press [Drive Bypass]. Display changes to show
bypass and drive mode options (shown in Step 2).
1 = Display
2 = Info key
3 = Drive/Bypass Option Key
2. When running in drive mode, press [OK] on
keypad to activate bypass mode or press CANCEL
to remain in drive mode. In bypass, the motor will
run at full speed.
3. When running in drive mode, press [OK] on the
keypad to activate drive mode or press [Cancel] to
remain in bypass mode.
4. Press [Status] to return to drive status display.
Electronically Controlled Bypass (ECB) Opera-
tion
BAS-SVX49A-EN 6-5