Filter
Top Products
9RT-PRC001-EN
Easy to Install and Service
Conversionless Units
The dedicated design units (either
downflow or horizontal) require no panel
removal or alteration time to convert in
the field — a major cost savings during
installation.
Horizontal units come complete with duct
flanges so the contractor doesn’t have to
field fabricate them. These duct flanges
are a time and cost saver.
Easy Access Low Voltage Terminal Board
Voyager’s Low Voltage Terminal Board is
external to the electrical control cabinet. It
is extremely easy to locate and attach the
thermostat wire. This is another cost and
time saving installation feature.
Low Voltage Connections
The wiring of the low voltage connections
to the unit and the zone sensors is as
simple as 1-1, 2-2, and 3-3. This simplified
system makes it easy for the installer to
wire.
Powered or Unpowered Convenience
Outlet
This option is a GFCI, 120v/15amp, 2 plug,
convenience outlet, either powered or
unpowered. This option can only be
ordered when the Through the Base
Electrical with either the Disconnect
Switch, or Circuit Breaker, option is
ordered. This option is available on all
downflow models.
Single Point Power
A single electrical connection powers the
unit.
Single Side Service
Single side service is standard on all
units.
Through the Base Electrical with Circuit
Breaker
This option is a factory installed thermal
magnetic, molded case, HACR Circuit
Breaker with provisions for through the
base electrical connections. This option is
available on all downflow models.
Through the Base Electrical with
Disconnect Switch
Factory installed 3-pole, molded case,
disconnect switch with provisions for
through the base electrical connections
are available. This option is available on
all downflow models.
Through the Base Utilities Access
An electrical service entrance shall be
provided allowing electrical access for
both control and main power connections
inside the curb and through the base of
the unit. Option will allow for field
installation of liquid-tight conduit and an
external field installed disconnect switch.
Factory Installed Options
A wide variety of Factory Installed
Options (FIOPs) are available.
Added Efficiency
Airflow
Airflow is outstanding. The Voyager can
replace an older machine with old
ductwork and, in many cases, improve
the comfort through better air
distribution.
High Efficiency Motors
This option is available with efficiency
ratings from 86.5 up to 91.0. It is not
available for all models.
U-shaped Airflow
U-shaped airflow allows for improved
static capabilities.
Low Ambient Cooling
Cooling capabilities down to 0°F as
standard.
Oversized Motors
Factory or field installed oversized
motors available for high static
applications.
One of our Finest Assets:
Trane Sales Representatives are a
Support group that can assist you with:
— Product
— Application
— Service
— Training
— Special Applications
— Specifications
— Computer Programs and much more
Voyager has the features and benefits
that make it first class in the light
commercial rooftop market. Designed
with input from field contractors and
engineers, its U-shaped airflow
performance is outstanding.
Features and
Benefits