Filter
Top Products
4. Monitor function
The sensor temperature or operational status of indoor unit, outdoor unit, or remote controller can be monitored.
Lite-Vision plus Remote Controller
Installation Manual
1 Push the [ ∧ ] / [ ∨ ] button to select
“4. Monitor function” on the “Field setting
menu” screen, then push the “
Set” [
F2] button.
ÆPush the [ ∧ ] / [ ∨ ] button to select
the code to check data.
2 Refer to the Installation Manual supplied
with the indoor unit or outdoor unit or
service manual for details about the check
code and data.
3 Push the [ CANCEL] button to return to
the “Field setting menu” screen.
Monitor function
Code
00
Data
0024
Return
Set
Lite-Vision plus Remote Controller
Installation Manual
5. DN setting
Perform the advanced settings for the air conditioner.
Carry out the setting operation while the indoor unit is sto
pped. (Turn off the air conditioning unit before starting the
setting operation.)
1 Push the [ ∧ ] / [ ∨ ] button to select
“5. DN setting” on the “Field setting menu”
screen, then push the “ Set” [
F2] button.
ÆThe fan and louver of the indoor unit operate.
When the group control is used, the fan and
louver of the selected indoor unit operate.
ÆMove the
cursor to select “DN code” with the
“
<” [ F1] button, then set “DN
code” with the [
∧ ] / [ ∨ ] button.
ÆMove the
cursor to select “data” with the
“
>” [ F2] button, then set “data”
with the [
∧ ] / [ ∨ ] button.
2 Refer to the Installation Manual supplied
with the indoor unit or service manual for
details about the DN code and data.
3 Push the [ MENU] button to set the other
DN codes. After “Continue?” is displayed
on the screen,
push the “
Yes”
[
F1] button.
4 Push the “ No” [ F2] button to
finish the setting operation. “ ” appears on
the screen for a while, then the screen
r
eturns to the “
Field setting menu” screen.
ÆPushing the “ No” [ F2] button
displays the unit selection screen when the
gr
oup control is used. Push the [
CANCEL]
button on the unit selection screen to finish the
sett
ing operation. “
” appears on the screen for
a while, then the screen returns to the “Field
setting menu” screen.
DN setting
Code
(DN) Data
Return
10 0000
Fix
<>
Set
<
>
Yes
No
No
DN setting
Code
(DN) Data
Return
10 0001
Fix
<>
Return
Continue?
NoYes
DN setting
FILE NO. SVM-12004
– 110 –