Filter
Top Products
Lite-Vision plus Remote Controller
Installation Manual
Initial setting
1. Clock
Set the year, month, date, and time.
1 Push the [ MENU] button to display the
menu screen.
2 Push the [ ∧ ] / [ ∨ ] button to select
“10.Initial setting”on the menu screen, then
push the “
Set” [
F2] button.
3 Push the [ ∧ ] / [ ∨ ] button to select
an item on the “Initial setting” screen.
4 Push the “ Set” [ F2] button.
ÆThe selected menu setting screen will be
displayed.
5 Push the [ CANCEL] button to return.
ÆThe screen returns to the menu screen.
1 Push the [ ∧ ] / [ ∨ ] button to select
“1. Clock” on the “Initial setting” screen,
then push the “ Set” [
F2]
button.
2 Push the [ ∧ ] / [ ∨ ] button to select
the year, month, date, and time.
ÆPush the “ -” [ F1] / “
+” [ F2] button to set the value.
3 Push the [ MENU] button.
Set
Set
Initial setting(1/2)
1.Clock
2.Name of room
3.Screen contrast
4.Backlight
5.Key lock
Set
Return
Set
– +
Clock
Date
Month
Year
Hour
Minute
01
01
2010
00
00
–
+
Return Fix
Lite-Vision plus Remote Controller
Installation Manual
To adjust the clock
2. Name of room
Set the name of the room or place where the remote controller is installed. (Operations of the air conditioner are
possible without this setting.)
1 Push the [ ∧ ] / [ ∨ ] button to select
“1. Clock” on the “Initial setting” screen,
then push the “ Set” [
F2]
button.
2 Push the [ ∧ ] / [ ∨ ] button to select
the year, month, date, and time.
ÆPush the “ -” [ F1] / “
+” [ F2] button to set the value.
3 Push the [ MENU] button.
The clock display appears on the upper right of the
screen.
• The clock display blinks if the clock setting has
be
en reset due to power failure or other cause.
NOTE
The available date range is from January 1
st
, 2010 to December 31
st
, 2099.
1 Push the [ ∧ ] / [ ∨ ] button to select
“2. Name of room” on the “Initial setting”
screen, then push the “ Set” [
F2] button.
2 Set the name of the remote controller.
Enter the characters of the name in the screen
(1).
Move the cursor to select the character with the
[
∧ ] / [ ∨ ] button and
“ ←” [ F1] / “ →” [
F2] button (the selected character is highlighted),
then
push the [
MENU] button.
Name of the remote controller appears.
Up to 16 characters can be entered for Name of
roo
m.
Clock
Date
Month
Year
Hour
Minute
01
01
2010
00
00
–
+
Return Fix
Set
– +
24
Room A
12:00
Mode
Fan Speed
Cool
Initial setting(1/2)
1.Clock
2.Name of room
3.Screen contrast
4.Backlight
5.Key lock
Set
Return
Set
Return Set
Fix
Del
ABCDE
FGHI J
KLMNO
PQRST
UWXY
Z&/:·
abcde
fghij
klmno
pqrst
uvwxy
z–+!?
12345
67890
(1)
FILE NO. SVM-12004
– 103 –