Filter
Top Products
All installations and services must be performed by qualified service personnel.
The unit is manufactured with runner supports that raise the unit, about 1.25
inches above the mounting base, allowing air circulation beneath the metal
surfaces. This clearance helps to promote air circulation under the base that
allows the unit to be mounted on combustible materials. This clearance also
helps to reduce metal corrosion caused by a buildup of moisture under the
appliance.
3. The cooling system condenser must have an unrestricted supply of air for
efficient cooling.
4. The cooling system fan discharges air, upward through the top grill. For this
reason, this appliance should not be located under an overhang or any other
obstruction to airflow that would redirect the heated discharge air back into
the condenser. The appliance should be located as illustrated in Figure 1,
below.
Figure 1: Selection of Appliance Installation Location
12