Filter
Top Products
Elastomeric or Polyurethane
caulk must be used.
Lay door unit on edge or face so that bottom side of sill
can be caulked. Place very large beads of caulk across full
width of sill. Additionally, place “Elastomeric or Polyurethane
caulk” along the junction of the sill and jamb and on the bottom
surface of the jambs and brickmold.
Apoye la puerta sobre un borde o sobre una superficie para
poder enmasillar la parte inferior del umbral. Aplique una gran
cantidad de masilla a todo lo ancho del umbral. Aplique tembien
masilla a lo largo de la union con el marco y en la superficie
inferior de los marcos y molduras.
Caulk sill bottom.
Enmasille el subsuelo y la parte
infferior del umbral.
3 cont.
Elastomeric or Polyurethane
caulk must be used.
Apply sealant to back side of brickmould around perimeter
of the door. A1/2”- 5/8” bead of “Elastomeric or
Polyurethane caulk” is essential.
Important!
If sill extender is used, place a large bead of caulk at
the junction of the extender and the sill approach.
Note:
Note: Do not caulk the bottom of the sill if you are
using a sill pan.