Filter
Top Products
Configurable Analog Output Overview Teledyne API Model M201E NH
3
Analyzer Operator Manual
28 05206H DCN5910
3.2 ANALOG OUTPUT SIGNAL TYPE AND RANGE SELECTION
To select an analog output signal type (DC voltage or current) for one of the
analyzer analog output channels press SETUP - MORE -DIAG - 818…ENTER-
NEXT…NEXT:
DIAG
A
NALOG I / O CONFIGURATION
PREV NEXT ENTR EXIT
DIAG AIO
A
OUTS CALIBRATED: NO
< SET SET> CAL EXIT
FROM ANALOG I/O CONFIGURATION MENU
DIAG AIO DATA_OUT_2 RANGE: 5V
SET> EDIT EXIT
DIAG AIO DATA_OUT_2 RANGE: 5V
0.1V 1V 5V 10V CURR ENTR EXIT
These Keys set
the Signal Level
of the selected
channel
DIAG AIO DATA_OUT_2: 5V, NH3CNC1, CAL
< SET SET> EDIT EXIT
Press SET> to select the Analog
Output channel to be configured:
DISPLAYED AS = CHANNEL
DATA_OUT_1 = A1
DATA_OUT_2 = A2
DATA_OUT_3 = A3
DATA_OUT_4 = A4
Then Press EDIT t o continue
Press ing ENTR re cords
the new setting
and returns to the previous menu
Pressing EXIT ignores the new setting
and returns to the previous menu
Press SET> to select the channel
parameter:
DATA_OUT_2 RANGE: 5V
DATA_OUT_2 OVERRANGE: ON
DATA_OUT_2 REC OFS: 0 mv
DATA_OUT_2 AUTO CAL: ON
DATA_OUT_2 CALIBRATED: YES
DATA_OUT_2 OUTPUT: ON
DATA_OUT_2 DATA: NO
2
CNC1
DATA_OUT_2 SCALE: 500 PPB
DATA_OUT_2 PRECISION: 1
DATA_OUT_2 UPDATE: 5 SEC
Then Press EDIT to continue
Figure 3-2. Analog Output Signal Type