Sterling SMD SERIES Dehumidifier User Manual


 
SMD Series Dehumidifying Dryers Page 9
General Information 1
1-1 Models Covered
This manual provides instructions for installing and operating
Sterling SMD30 and SMD60 membrane dryers. The number
designation represents air flow capacity. SMD30 models have a 30
cfm air flow capacity, and SMD60 models have a 60 cfm capacity.
1-2 Equipment Function
Sterling membrane mini dryers are designed to generate heated,
dehumidified air at carefully controlled temperatures for use in
plastic drying systems. Drying systems are sized to meet the
specific requirements stated by the purchaser at the time of
purchase.
Moisture removal from hygroscopic (moisture attracting) plastic
pellets is an essential step in the manufacture of high-quality
plastic products.
Sterling dehumidifying dryers are used to generate very low dew
point air heated to a controlled temperature for drying plastic
pellets and regrind.
1-3 Necessary Documents
The documents listed below are necessary for the operation, in-
stallation, and maintenance of Sterling SMD30 through SMD60
dryers. Additional copies are available from Sterling.
Familiarize the appropriate personnel with these documents:
; This manual.
; The schematic and assembly drawings included in the customer
information packet.
; The Customer Parts List included in the information packet.
; Operation and installation manuals for any optional controls or
auxiliary equipment in the drying system.