Filter
Top Products
SMD Series Dehumidifying Dryers Page 39
WATLOW Operating Parameters
The WATLOW controller has only one mode selection; ALARM.
The factory at Sterling sets the security level to protect the critical
parameters from being accidentally changed. Below is an
explanation of the modes you will have access to and the Sterling
default settings.
Entering Operating Parameters to Select Modes
To enter the display:
1. Press both the Up
and Down keys for three
seconds from the home page. The word SEE will appear in
the upper display and PAGE will appear in the lower
display.
2. Press the Advance Key
to move through the parameter
prompts.
3. Press the Up
or Down keys to change the
parameter value.
4. Press the RESET Key at any time to return to the Home
Page display.