Filter
Top Products
SMD Series Dehumidifying Dryers Page 47
Maintenance 8
8-1 Work Rules
The installation, operation, and maintenance of this equipment is to
be conducted in accordance with all applicable work and safety
codes for the installation location. This may include, but is not
limited to, OSHA, NEC, CSA, and any other local, national, and
international regulations.
In addition, you must observe the following specific work rules:
; Keep these operating instructions on hand and follow them
when installing, operating, or maintaining your dryer.
; If the instructions become damaged or unreadable, you can
obtain additional copies from Sterling.
; Only qualified personnel familiar with this equipment should
work on or with this unit.
; Work only with approved tools and devices.
; Disconnect power before servicing your dryer. If the
disconnect switch you installed has a lockout, lock it in the
OFF position before you perform any maintenance or service.
8-2 Servicing Process Air Filters
Important!
Operating the dryer without the process air filter installed voids
your warranty!
Filter cleaning is an important part of your dryer maintenance
program.
SMD dryers have two compressed air filters in the process air
system. The filters protect the membrane from being contaminated
by oil particles. Regular filter cleaning is essential to keep your
dryer operating at peak efficiency.