Filter
Top Products
SMD Series Dehumidifying Dryers Page 37
Figure 9
Typical Dew Point Display Monitor
PV
SV
OUT1
OUT2 MANU STOP RMT AT SUB1
AT
E5CK
OMRON
(Note: The only functional buttons on this contoller
are the up and down keys.)
5-8 Setting the High Dew Point Alarm
The high dew point alarm setting is changed by pressing the up and
down keys to input the alarm value. The factory setting for Alarm
Value 1 (
AL-1
) is -10°F (-23°C).
5-9 Restoring the E5CK Dew Point Meter to Factory
Setup
If the preset parameters on the controller have been tampered with
and it no longer functions properly, call the Service Department at
Sterling. This controller is not meant to be modified.
Note: The dew point alarm monitors and indicates
a deviation from the set point.
-4
0
-1
0