Filter
Top Products
Page 26 SMD Series Dehumidifying Dryers
SMD30 and SMD60 Electrical Schematics
Refer to your Customer Information Packet on actual drawings for
your specific dryer.
4-4 Making Dryer/Drying Hopper Process Air
Connections
Floor Mount Models
; Use high-temperature flexible dryer hose or rigid tubing to
connect the dryer to the drying hopper.
; Keep the delivery hose to the drying hopper as short as
possible to minimize heat loss. We strongly recommend
insulated hose for maximum energy savings.
; Make sure that hoses are not kinked or collapsed.
; Drying hopper air inlet and outlet locations vary, but always
connect hoses so the dry process air from the dryer enters the
bottom of the drying hopper and flows out the top.
; Clamp hose adaptor onto dryer with hose clamps provided.
; Clamp hopper hose adaptor to hopper with clamp provided.
Figure 5
Dryer Hose Connections to Hopper