Filter
Top Products
4 –Pump 38-Station Controllers Chapter 4: Operation 24 of 44
The following table explains the status represented by each color at the “Station Status”
screen.
Color Label Description
Gray outline Offline Station is not enabled. The controller ignores any demands or
alarms.
Green Full Station is enabled and idle (full).
Yellow Demand Station requires material.
Blue Convey Station is being loaded with material.
Light blue Dry Air
Convey
Air to convey material is coming from dry air source, rather than
ambient air.
Purple Unload Station is dumping material into its receiver.
Blue, blinking Priority Station is in priority convey mode. Its pump will be temporarily
dedicated to filling it as soon as possible.
Red Alarm Station is in alarm.
Red outline Critical Station is in critical alarm. The controller has disabled the station
until the alarm is cleared.
White Purge Air is being drawn through material lines.
Additional basic information about each station (convey time, dump delay, and pump
assignment) is available at the “Station Operator” screen. See page 28 for details.
Detailed configuration settings for each station are available at the “Station Setup” screen.
See page 36 for details about each of these settings.