Filter
Top Products
Manual Bu_Onhoii:ng _
Set the Machine
Thread tension
2to6
J: Sliding buttonhole
to at
[ _J step ] A\
I -.--Is EPi _]
NOTE:
Sen_or_
Do not put finger, screw driver or
any other object near or under the
sensor when sewJrlg buttonholes by
us{n0 sliding buttonhole foot J.
Otherwise the sewing procedure in
the pattern indicator may advance
to the next steps.
(_) a. Carefully mark the buttonhole length on
your garment.
b, Change to the sliding buttonhole foot.
e. Insert the garment under the foot with the
buttonhole marking running toward you.
Slide both threads to the left.
(_) a, Move the slider (A) away from you so that
the bottom mark {C) on the slider meets the
start mark /B).
b. Line up the markings on the foot with the
bottom mark on your garment.
c. Lower the presser foot and press BH1
(bar-tack} button.
NOTE: The markings on the slider are made in
cenf_meters.
(_ The machine will barrack and sew up the left
side of the buttonhole.
Stop the machine at the top mark.
69