Filter
Top Products
Use the Seam Guides
Cornen ng gutcle
The seam guides on the needle plate are
engraved to hefp you measure seam
width. The lines are 1/8" apart, with
the 5/8" and 7/8" lines marked.
Turn a Square Corner
Cornenng
uide
To turn a square corner 5/8" from the fabric edge:
1. Stop stitching and lower the needle by pressing the Up/Down Needle
Position button when the fabric edge facing you lines up with the
cornering guide as shown,
2. Raise the presser foot and turn the fabric to line the edge with the 5/8"
seam guide.
3. Lower the presser foot and begin stitching in the new direction.