Filter
Top Products
e Wind the Bobbin
0 Guide the thread around the thread guide.
Th read gu ide
jD
Bobb]n
wJnder
stopper
#®
winding
spindle
(_) Thread through the hole in the bobbin from the inside to the outstde.
(_) Put the bobbin on the bobbin winder spindle, and push _t to the right. With the free end of the thread he_d in your hand, depress the foot control.
Stop the machine when it has made a few turns, and cut the thread close to the hole in the bobbin,
(&) Depress the foot controt again. When the bobbin is fully wound, it will stop automatically.
_) Return the bobbin winder to its original position by mowng the spindle to the left, and cut the thread as shown.
, .J