Filter
Top Products
o Plug m the Machine and Switch on the Power
f
Power suppty plug
Power
switch
NOTE.
Plug
connector
Machine
plug
Before inserting the plug into your
machine, be sure the power sw_tch ts
OFF.
1. Check your outlet to be sureitls a 110to t20
Vott AC outlet.
2. insert the machine plug into the three-prong
outlet, as shown, ft will only fit one way.
3. Insert the power supply plug into the outlet.
Sewing ligl_l
Power sw_ tch
k_ J
4. Push the light and power sw_tch to turn
on the power and sewing light.
SAFETY FEATURE:
Your machine will not operate unless the
light/power switch is turned on. If you are
interrupted or stop sewing, turn off the
light/power sw_tch to prevent injury to
chitdren.
• Foot Cont_o| Use
I: ..... /.t ..... ::;,;::;,,L........... !
/
Foot control
The foot control regulates the speed at
which you sew.
To increase speed, gently press down with
the ball of your foot.
To decrease speed, release your foot pres-
sure slightly.
NOTE: The foot control is sensmve and
wilt increase or decrease your
sewing speed immediately.
Practice on a scrap of fabric to
regulate your sewing speed to
your taste and needs.