Filter
Top Products
Sewa Button
Set the Machine
Stitch width control
Top thread tension
control 2 tO6
A_
Stitch length control
Any number {not
necessary to adjust)
Stretch Stitch
Use the darning plate for button sewing (see page 2__9).
i!iiiii iiii!i
1, Match the center of the but-ton holes to the center of the slot on the presser
foot,
2, Ad.iust the stitch width so that needle will drop in each hole,
3, Lower the foot to hold the button in place,
Turn the hand wheei by hand so that needle will enter either hole of the
button.
4, Stitch several t_mes,
To strengthen the shank, cut the
threads leaving a 8" tail. Bring the
needle thread down through the hole
in the button and w_nd it around the
shank.
Drew the thread to the bottom side
and knot.
35