Filter
Top Products
2_ a_
b,
c.
e gu_deplate
Gu_d__ Tempfa_e
__Catch
"4ii_i_l Setting Mark
block _!:!fl;:i!_;i_i Gear
Guide
When you have selected the template with the size and style button-
hole you need, slide the template into the guide plate.
Pull catch toward you while sliding the template until the button-
hole size you have chosen is at the setting mark,
insert gear of base plate into slot of template and fit guide block
into the center of the guide slot.
3. a.
b.
obbin
thread
C_
d.
nhote toot
Gear,x _t..f Slot
" _" "" _ point
Attach the buttonhole toot.
Adjust position of gear so it is aligned with the starting point of
template.
The lever can be used to change gear position.
Pull the bobbin thread up through guide slot by turning the hand wheel
toward you while holding top thread.
Place the bobbin and top threads to the left side of gu=deplate.
Leave 3 to 4 inches of thread.
46