Filter
Top Products
Insert the Bobbin into the Bobbin Holder
Q
............. J
1. Put the bobbin into the bobbin
holder so that the thread feeds
counter-cJockwJse lleft).
®
2. Pull about 4 inches of thread
toward you through the tension
slot @ ,.
®
3. Then puft the thread clockwise
toward the back of the machine
through the slot _ -
®
4.
J
Slide the bobbin cover plate while
pushing it down slightly over the
bobbin. Allow about 4 inches of
thread to show above the needle
plate,
chart
* Threading chart is located behind
the face cover plate.
16