Schneider Electric iEM3300 Indoor Furnishings User Manual


 
iEM3100 / iEM3200 / iEM3300 series user manual Safety precautions
DOCA0005EN-04 9
Chapter 1 Safety precautions
Installation, wiring, testing and service must be performed in accordance with all local and national
electrical codes.
Carefully read and follow the safety precautions outlined below.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices.
See NFPA 70E in the USA or applicable local standards.
This equipment must only be installed and serviced by qualified electrical personnel.
Turn off all power supplying this device and the equipment in which it is installed before working
on the device or equipment.
Always use a properly rated voltage sensing device to confirm power is off.
Before performing visual inspections, tests, or maintenance on this equipment, disconnect all
sources of electric power. Assume that all circuits are live until they have been completely
de-energized, tested and tagged. Pay particular attention to the design of the power system.
Consider all power supply sources, particularly the potential for backfeed.
Replace all devices, doors and covers before turning on power to this equipment.
Do not exceed the device’s ratings for maximum limits.
Failure to follow these instructions will result in death or serious injury.
WARNING
UNINTENDED OPERATION
Do not use the meter for critical control or protection applications where human or equipment safety
relies on the operation of the control circuit.
Failure to follow these instructions can result in death, serious injury or equipment damage.
WARNING
INACCURATE DATA RESULTS
Do not rely solely on data displayed on the front panel or in software to determine if the device is
functioning correctly or compliant with all applicable standards.
Do not use data displayed on the front panel or in software as a substitute for proper workplace
practices or equipment maintenance.
Failure to follow these instructions can result in death, serious injury or equipment damage.