Filter
Top Products
iEM3100 / iEM3200 / iEM3300 series user manual Front panel display and meter setup
DOCA0005EN-04 41
Configuration menu for iEM3100 / iEM3110 / iEM3115 / iEM3300 / iEM3310
A iEM3110 / iEM3115 / iEM3310
B iEM3110 / iEM3310
C iEM3115
Wiring
Type
Frequency
Frequency
Date
Date
Time
Time
Disable
by Internal Clock
Multi Tariffs
Control mode
Schedule
by 2 Tariffs
by 3 Tariffs
by 4 Tariffs
by Digital Input
by Communications
Pulse Output
Pulse Constant
Contrast
Contrast
Password
Password
Reset Config
Reset Config
Pulse Width
Section Parameter Options Description
Wiring Type
3PH3W
3PH4W
1PH2W L-N
1PH2W L-L
1PH3W L-L-N
Select the power system type the meter is wired to.
Frequency Frequency
50
60
Select the frequency of the electrical power system, in Hz.
Date (iEM3110 / iEM3115 /
iEM3310)
Date DD-MMM-YYYY Set the current date using the specified format.
Time (iEM3110 / iEM3115 /
iEM3310)
Time hh:mm Use the 24-hour format to set the time.
Pulse Output
Pulse Constant
(imp/kWh)
100
200
1000
1
10
20
Set the pulses per kWh for the pulse output.
Pulse Width
(ms)
50
100
200
300
Set the pulse width (ON time).
Multi Tariffs (iEM3115) Control Mode
Disable
by Digital Input
by Internal Clock
Select the tariff control mode:
• Disable: the Multi Tariff function is disabled.
• by Digital Input: the digital input is associated with the multi-tariff function. A
signal to the digital input changes the active tariff.
• by Internal Clock: the device clock controls the active tariff. If you set the
Control Mode to by Internal Clock, you must also configure the schedule.
Set the time when each tariff period starts, using the 24 hour clock format
(00:00 to 23:59). The start time of the next tariff is the end time of the current
tariff. For example, T2 start equals the end of T1.
Contrast Contrast 1-9 Increase or decrease the value to increase or decrease the display contrast.
Password
(iEM3110 / iEM3115 /
iEM3310)
Password 0-9999 Sets the password for accessing the meter configuration screens and resets.
Reset Config Reset Config — Settings are reset to their defaults, except for Password. Meter restarts.