Sanyo SAP-K12AP Air Conditioner User Manual


 
11
.
4.4.1TIMER ON mode
(Example)
After the length of time set for TIMER ON elapses, the unit
begins operating.
The display depicted at left indicates that the air conditioner will
begin operating in 10 hours.
Setting procedure:
STEP 1
STEP 2
STEP 3
Press the “ON/OFF” button and press “MODE”
button to set the desired operation mode. (See
“Operation with the Remote Control Unit”, Pg10).
Again, press the “ON/OFF” button to “OFF” the unit.
Press the “TIMER-ON” button.
Press the “T-ON” button (which advances the clock
displayed) to set the time at which you want
operation to begin.
The time can be set for 1 min. intervals for 24 hrs.
Hold pressing (+) / (-) button, it quickly change the
time value.
Press the “T-ON” button again to confirm the set
time is 10 A.M.
The display changes immediately to CLOCK, but the
indication remains.
To check the status of the timer while it is counting down,
press the “TIMER-ON” button.
Cancellation Procedure : Press the “TIMER ON” button again
to cancel.
After the length of time set for TIMER OFF elapses, the unit
stops operating.
The display depicted at left indicates that the air conditioner will
stop operating in 10 A.M.
Setting procedure:
STEP 1
STEP 2
Press the TIMER OFF button.
Press the “T-OFF” button (which advances the clock
displayed) to set the time at which you want
operation to stop.
The time can be set for 1 min. intervals for 24 hrs.
Hold pressing (+) / (-) button, it quickly change the
time value.
Press the “T-OFF” button again to confirm the off
time is 10 A.M.
The display changes immediately to CLOCK, but the
indication remains.
To check the status of the timer while it is counting down,
press the “T-OFF” button.
Cancellation Procedure : Press the “TIMER OFF” button once
again.
(Example)
4.4 Using the 24-Hour “ON” or “OFF” Timer
4.4.2 TIMER OFF mode
OFF
ON
4. OPERATION OF WIRELESS REMOTE CONTROL UNIT
Operation and Maintenance