Sanyo SAP-K12AP Air Conditioner User Manual


 
10
4.3 Using the General Operation
Press the setting buttons as described below and change the settings
as desired.
To STOP the air conditioner, press the ON/OFF operation button again.
STEP 2
STEP 1
STEP 4
STEP 5
STEP 3
STEP 1
STEP 3
STEP 4
STEP 5
To start the air conditioner, press the ON/OFF operation button.
Press the TEMP. setting buttons to change the temperature setting
to the desired temperature.
Adjustable temperature range:
30 °C (86 °F) max.—16 °C (61 °F) min.
Under “AUTO” operation, the temperature can not be adjust.
Under other operation, the initial value is 25 °C (77 °F).
Set the FAN SPEED selector button to the setting you want.
Press the
automatically
button and set the air blow direction as desired or
.
AUTO
: Auto fan speed.
: High fan speed.
: Middle fan speed.
: Low fan speed.
Under Dry mode, the fan speed is automatically set to LOW.
STEP 2
Press the MODE selector button and select the desired mode.
For DRY operation
For COOLING operation
For FAN only operation
For AUTO operation
For HEATING operation
(Not function for cooling only model)
NOTE
NOTE
4. OPERATION OF WIRELESS REMOTE CONTROL UNIT
Operation and Maintenance