Filter
Top Products
Regency
®
L676E Direct Vent Gas Fireplace 29
INSTALLATION
7) Slide the left side brick panel into position and secure in place with
the brick panel clip that was removed in step 3.
1) Ensure installation of the logs and glass door has been completed
before installing the exterior brick panels.
2) Line up the pins in the exterior base brick panel with the holes on
the outerbox of the fi rebox and fi t in place.
3) Install the right side exterior brick panel by placing the bottom tab
into the slot of the exterior base brick panel.
The top of the brick panel is held in place by a magnet that sits
against the bracket as shown in the image below.
Repeat for left side exterior brick panel.
Outerbox of Firebox
Tab
Bracket
Exterior Brick Panel Installation:
Left
Side
Brick
Panel
Base Brick Panel Slot
Top Brick Panel
Top Brick Panel
Right Side
Brick Panel
Brick
Panel
Clip
6) Place the top brick panel into position and hold it in place while slid-
ing the right side brick panel into position and secure using the brick
panel clip that was removed in step 3.
Back Brick Panel
5) Install the back brick panel by carefully placing it against the back
wall of the fi rebox.
INSTALLATION